Tom Gray Tom Gray's Profile Page

Tom Gray Tom Gray

0 Course Enrolled • 0 Course Completed

Biography

800-150높은통과율시험대비공부문제최신버전덤프샘플문제

Cisco업계에 종사하시는 분들은 800-150인증시험을 통한 자격증취득의 중요성을 알고 계실것입니다. Fast2test에서 제공해드리는 인증시험대비 고품질 덤프자료는 제일 착한 가격으로 여러분께 다가갑니다. Fast2test덤프는 800-150인증시험에 대비하여 제작된것으로서 높은 적중율을 자랑하고 있습니다.덤프를 구입하시면 일년무료 업데이트서비스, 시험불합격시 덤프비용환불 등 퍼펙트한 서비스도 받을수 있습니다.

지금 같은 정보시대에, 많은 IT업체 등 사이트에Cisco 800-150인증관련 자료들이 제공되고 있습니다, 하지만 이런 사이트들도 정확하고 최신 시험자료 확보는 아주 어렵습니다. 그들의Cisco 800-150자료들은 아주 기본적인 것들뿐입니다. 전면적이지 못하여 응시자들의 관심을 쌓지 못합니다.

>> 800-150높은 통과율 시험대비 공부문제 <<

800-150높은 통과율 공부자료 & 800-150인증시험대비 공부자료

Cisco인증800-150시험을 패스함으로 취업에는 많은 도움이 됩니다. Fast2test는Cisco인증800-150시험패스로 꿈을 이루어주는 사이트입니다. 우리는Cisco인증800-150시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게Cisco인증800-150시험을 응시할 수 있는 자료입니다.

최신 Cisco Certified Field Technician (CCT) 800-150 무료샘플문제 (Q97-Q102):

질문 # 97
Which operating system powers the Cisco Nexus series of switches and is optimized formodern data center deployments?

A. IOS XR
B. IOS XE
C. NX-OS
D. IOS

정답：C

설명：
Cisco NX-OSis the operating system specifically developed forCisco Nexus series switches, which are widely used in modern data centers. NX-OS is optimized forscalability, high availability, and virtualization features.
It differs from IOS and IOS XE (used in traditional routers and switches) and IOS XR (used in carrier-grade platforms). NX-OS includes advanced features such as Virtual Port Channels (vPC), FabricPath, and integrated Layer 2/3 capabilities tailored for data center networks.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco IOS Software Basics

질문 # 98
Which two results are achieved by briefly pressing the restore/reset button on a Cisco Meraki switch? (Choose two.)

A. Cloud management is disabled.
B. A full factory restore is performed.
C. The management interface is cleared.
D. The downloaded configuration is deleted.
E. The device reboots.

정답：C,E

설명：
On aCisco Meraki switch, briefly pressing therestore/reset button(typically less than 5 seconds) triggers:
* A reboot of the device(Option A)
* Clearing of the local management interface settings(Option D), which may include temporary network information such as DHCP leases or local overrides.
To perform a full factory reset (Option B), the button must be held down for a longer duration, usuallymore than 10seconds. Options C and E do not reflect standard reset behavior.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Maintenance and RMA Procedures

질문 # 99

Refer to the exhibit. Drag and drop the names of the field-replaceable units from the left onto the corresponding letters on the image of the Cisco NCS 5500 Series modular router.

정답：

설명：

Explanation:

A # Line cards
Provide the physicalinterfaces for network connectivity.
B # Route processor cards
Manage routing functions and system control.
C # Transceivers
Installed in the ports of line cards for optical/electrical signal transmission.
D # Power supplies
Provide power to themodular system and are hot-swappable.
Cisco'sNCS 5500 Seriesis designed for service provider and data center deployments. The FLDTEC course outlines the layout of FRUs in modular platforms like this one:
A - Line Cards: Located in the upper slots, these modules handle the bulk of switching and forwarding functions.
B - Route Processor Cards (RP Cards): Positioned centrally, these provide management and control plane services for the router.
C - Transceivers: Installed into the line cards, transceivers provide physical connectivity through optical or copper interfaces.
D - Power Supplies: Located in the bottom rear section, these modules provide redundant and hot-swappable power to the chassis.
Recognizing each FRU visually and functionally is critical when performingRMA procedures,component diagnostics, orhardware upgradesin the field.

질문 # 100
What are two indicators that a network interface card must be replaced? (Choose two.)

A. Inability to save configurations
B. Connectivity problems
C. Boot failures
D. Frequent system crashes
E. Consistent link down status

정답：B,E

설명：
ANetwork Interface Card (NIC)is essential for device connectivity. Two common symptoms indicating that a NIC may be faulty and require replacement are:
* Connectivity problems (Option A):Devices may fail to communicate with the network, showing no IP address assignment or inability to ping/connect to other devices.
* Consistent link down status (Option D):The link LED may stay off or frequently go down, even when connected to a functioning switch port with a known-good cable.
Other options like configuration issues (Option B) or system crashes (Option E) might be due to software or unrelated hardware components, and boot failures (Option C) typically point to motherboard or storage faults.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Equipment and Related Hardware

질문 # 101
Which two settings are standard Cisco console connections when configuring a terminal emulator to connect to the console port of a Cisco switch? (Choose two.)

A. Stop bits: 2
B. Speed (baud rate): 9600
C. Flow control: Hardware
D. Data bits: 8
E. Parity: Even

정답：B,D

설명：
When configuring a terminal emulator (such as PuTTY, Tera Term, or HyperTerminal) to connect to the console port of a Cisco switch, the standard settings are as follows:
* Speed (baud rate): 9600This is the default transmission speed for Cisco console ports, ensuring compatibility across various devices.
* Data bits: 8This setting specifies that each character transmitted consists of 8 data bits, which is standard for most serial communications.
* Parity: NoneNo parity bit is used, meaning there is no additional error-checking bit appended to each character.
* Stop bits: 1One stop bit indicates the end of a character transmission.
* Flow control: NoneNo flow control is employed, allowing continuous data transmission without hardware or software-based pausing.
Therefore, optionsC (Speed: 9600)andD (Data bits: 8)are correct. Options A (Stop bits: 2), B (Flow control:
Hardware), and E (Parity: Even) deviate from the standard settings and may result in communication issues if configured.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Device Configuration and Verification

질문 # 102
......

Demo를 다운받아Cisco 800-150덤프의 일부분 문제를 체험해보시고 구매하셔도 됩니다. 저희 Fast2test에서는Cisco 800-150덤프의 일부분 문제를 샘플로 제공해드립니다. 덤프만 열공하시면Cisco 800-150시험패스가 가능하기에 저희 자료를 선택한걸 후회하지 않게 할 자신이 있습니다.

800-150높은 통과율 공부자료: https://kr.fast2test.com/800-150-premium-file.html

우리Fast2test 의Cisco 800-150인증시험덤프는 Fast2test전문적으로Cisco 800-150인증시험대비로 만들어진 최고의 자료입니다, Cisco 800-150 덤프를 구매하여 1년무료 업데이트서비스를 제공해드립니다, 여러분이 신뢰가 생길수 있도록Fast2test에서는Cisco인증 800-150덤프구매 사이트에 무료샘플을 설치해두었습니다.무료샘플에는 5개이상의 문제가 있는데 구매하지 않으셔도 공부가 됩니다, Fast2test에서 고객님의Cisco인증 800-150시험패스꿈을 이루어지게 지켜드립니다, Cisco 800-150높은 통과율 시험대비 공부문제 시험문제커버율이 높아 덤프에 있는 문제만 조금의 시간의 들여 공부하신다면 누구나 쉽게 시험패스가능합니다.

나도 계속 이 집에서 재워줄 생각 없어요, 너를 안고 있는 남자가 누구인지를, 우리Fast2test 의Cisco 800-150인증시험덤프는 Fast2test전문적으로Cisco 800-150인증시험대비로 만들어진 최고의 자료입니다.

최신버전 800-150높은 통과율 시험대비 공부문제 퍼펙트한 덤프공부

Cisco 800-150 덤프를 구매하여 1년무료 업데이트서비스를 제공해드립니다, 여러분이 신뢰가 생길수 있도록Fast2test에서는Cisco인증 800-150덤프구매 사이트에 무료샘플을 설치해두었습니다.무료샘플에는 5개이상의 문제가 있는데 구매하지 않으셔도 공부가 됩니다.

Fast2test에서 고객님의Cisco인증 800-150시험패스꿈을 이루어지게 지켜드립니다, 시험문제커버율이 높아 덤프에 있는 문제만 조금의 시간의 들여 공부하신다면 누구나 쉽게 시험패스가능합니다.